上海榮計達儀器科技有限公司
參 考 價 | 面議 |
產品型號CBC4320
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-09-02 15:37:10瀏覽次數:290次
聯系我時,請告知來自 紡織服裝機械網滿足標準:JGJ107-2010《鋼筋機械連接技術規程》(2010.10.01實施)標定儀器:GWB-200B高精度引伸計標定器(量程0~25mm,分辨率0.0002mm) 鋼鐵研究總院制造
一、鋼筋殘余變形測試儀產品簡介:
■國家標準JGJ107-2010《鋼筋機械連接技術規程》規定,通過圓柱套筒機械連接的兩根鋼筋,在單向拉伸試驗中,接頭的變形性能等級是一級時要求:殘余變形u0≤0.10mm(鋼筋直徑d≤Φ32mm)和u0≤0.14mm(鋼筋直徑d>Φ32mm)。實際工作中測量到的殘余變形一般在0.030mm至0.080mm之間。殘余變形量很小。
■鋼筋殘余變形測試儀只有采用雙側引伸計測量得到的數據才是A準確的;
■雙側引伸計和鋼筋之間只有采用彈性連接(例如:彈簧和皮筋套),這樣測量得到的數據才是A可靠的。多次實驗證明:采用機械式剛性連接雖然連接方便,但是測量的數據誤差大,大于1%,重復性差,數據A靠,不能通過計量檢定。
First, the steel residual deformation tester product introduction:
■ National Standard JGJ107-2010 "Technical Regulations for Reinforcing Steel Connections" stipulates that two steel bars mechanically connected by a cylindrical sleeve, in the uniaxial tensile test, the deformation performance level of the joint is one level: residual deformation u0 ≤ 0.10 Mm (rebar diameter d ≤ Φ32mm) and u0 ≤ 0.14mm (rebar diameter d > Φ32mm). The residual deformation measured in actual work is generally between 0.030 mm and 0.080 mm. The amount of residual deformation is small.
■Rebar residual deformation tester is only accurate when the data measured by the double-sided extensometer is used;
■ Only the elastic connection between the double-sided extensometer and the steel bar (for example, spring and rubber sleeve) is such that the measured data is A reliable. Many experiments have proved that although the mechanical rigid connection is convenient, the measured data error is large, more than 1%, the repeatability is poor, the data A depends, and the measurement cannot be passed.
二、鋼筋殘余變形測試儀主要指標
■滿足標準:JGJ107-2010《鋼筋機械連接技術規程》(2010.10.01實施)
■標定儀器:GWB-200B高精度引伸計標定器(量程0~25mm,分辨率0.0002mm) 鋼鐵研究總院制造
■測量鋼筋直徑(mm):φ5~φ40
■測量分辨值(mm):0.001
■精度等級:1級
■數顯表顯示含義:
均值:表示PV1和PV2兩路的平均值
PV1 :表示A路引伸計變形測量值
PV2 :表示第二路引伸計變形測量值
Second, the main indicators of the residual deformation tester
■Meet the standard: JGJ107-2010 "Technical Regulations for Reinforcing Steel Connections" (implementation of 2010.10.01)
■ Calibration instrument: GWB-200B high precision extensometer calibrator (range 0 ~ 25mm, resolution 0.0002mm) Steel Research Institute manufacturing
■Measure the diameter of the steel bar (mm): φ5 to φ40
■Measurement resolution (mm): 0.001
■Accuracy level: Level 1
■Digital display shows the meaning:
Mean: Indicates the average of both PV1 and PV2
PV1 : indicates the deformation measurement value of the A path extensometer
PV2: indicates the second extensometer deformation measurement value
三、鋼筋殘余變形測試儀主要特點
■鋼筋機械連接殘余變形測試儀由兩只高精度可變標距引伸計,靈敏度保持一致,組成雙側引伸計,直接測量試樣的兩側平均變形量,測量結果準確;
■兩只引伸計測量標距可調,范圍50~260mm,量程5mm或10mm;
■四位三排兩輸入高精度數顯表,電路部分采用24位A/D高精度IC芯片設計,實時顯示兩只引伸計的真實變形量,數值穩定可靠;
■數顯表設置簡單,帶有密碼鎖設定功能,避免誤操作改動設定值;
■雙側引伸計和鋼筋之間采用彈性連接(例如:彈簧和皮筋套),試樣夾持方便,使用壽命長;
■本儀器由專業人員根據實際情況精心設計,結構合理,非常適合于建筑質檢部門檢測使用。
Third, the main characteristics of the steel residual deformation tester
■Reinforcement mechanical connection residual deformation tester consists of two high-precision variable gauge extensometers with the same sensitivity, forming a double-sided extensometer, directly measuring the average deformation of both sides of the sample, and the measurement results are accurate;
■ Two extensometers can measure the gauge length, ranging from 50 to 260mm, with a range of 5mm or 10mm;
■ Four-position three-row two-input high-precision digital display, the circuit part is designed with 24-bit A/D high-precision IC chip, real-time display of the true deformation of two extensometers, the value is stable and reliable;
■The digital display is easy to set up with the password lock setting function to avoid misuse and change the set value;
■The elastic connection between the double-sided extensometer and the steel bar (for example: spring and rubber sleeve), the sample is convenient to clamp and the service life is long;
■ This instrument is designed by professionals according to the actual situation, and the structure is reasonable, which is very suitable for the inspection and use of the building quality inspection department.
四、鋼筋殘余變形測試儀主要配置
■可變標距引伸計 兩只;
■高精度數顯表 一臺;
■常用工具附件 一套;
■使用說明書 一份;
■儀器包裝箱 一個(340×230×110mm)。
Fourth, the main configuration of the residual deformation tester
■Variable gauge length extensometer two;
■High-precision digital display
■A set of commonly used tools
■Instructions for use; one copy;
■ Instrument packaging box One (340 × 230 × 110mm).
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份