縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
上海榮計達儀器科技有限公司
參 考 價 | 面議 |
產品型號MGW-6500
品 牌
廠商性質其他
所 在 地上海市
紡織服裝機械網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-09-02 15:33:31瀏覽次數:170次
聯系我時,請告知來自 紡織服裝機械網試驗機是專業檢測儀器,專用鋼絞線、靜載錨固強度試驗之用。試驗機采用微機控制電液伺服加載和手動液壓加載,主體與控制柜分置的設計,液壓加荷有微機顯示計算儲存功能打印數據報告。大大降低了故障率。采用進口比例閥,穩定性高,加荷速度平穩。WINDDOWS版操作軟件簡單易用,十分鐘學會。
一,微機控制靜載錨固試驗機產品簡介:
試驗機是專業檢測儀器,專用鋼絞線、靜載錨固強度試驗之用。試驗機采用微機控制電液伺服加載和手動液壓加載,主體與控制柜分置的設計,液壓加荷有微機顯示計算儲存功能打印數據報告。大大降低了故障率。采用進口比例閥,穩定性高,加荷速度平穩。WINDDOWS版操作軟件簡單易用,十分鐘學會。
First, the product introduction:
The testing machine is a professional testing instrument, special steel strand and static load anchoring strength test. The testing machine adopts microcomputer to control electro-hydraulic servo loading and manual hydraulic loading. The main body and control cabinet are designed separately. The hydraulic loading has a microcomputer display calculation storage function print data report. Greatly reduced the failure rate. The imported proportional valve has high stability and stable loading speed. The WINDDOWS version of the operating software is easy to use and learns in ten minutes.
二,微機控制靜載錨固試驗機技術參數:
■A大試驗力: 6500KN
■測力范圍: 4%-A(全程不分檔,等效三檔)
■示值準確度(試驗力): 伏于示值的±1%
■位移測量范圍: 0-200mm
■示值準確度(位移): ±1%
■重復性: ±0.5%
■相對分辨率: ±0.5%
■活塞行程: 200mm
■拉伸間距: 3400mm
■功率: 4.4KW
■外形尺寸:主機:5030×700×2060mm
控制柜1180×800×1310mm
■凈重:3500Kg
Second, technical parameters:
■A large test force: 6500KN
■Measurement range: 4%-A (the whole process is not divided, equivalent to the third gear)
■Indication accuracy (test force): ±1% of the indicated value
■ Displacement measurement range: 0-200mm
■Indication accuracy (displacement): ±1%
■ Repeatability: ±0.5%
■ Relative resolution: ±0.5%
■Piston stroke: 200mm
■ Stretching distance: 3400mm
■Power: 4.4KW
■Dimensions: Main unit: 5030×700×2060mm
Control cabinet 1180×800×1310mm
■Net weight: 3500Kg
三,微機控制靜載錨固試驗機結構:
該臥式靜載錨固機由主機和控制柜(含油源、泵站)及微機控制系統三部分組成。
■主機:由負荷傳感器、機架、吊架、吊梁、圍板、千斤頂及墊板、錨板、錨具等組成。其中錨板、錨具及墊板隨做不同的試驗根數而更換不同的錨板和錨具。
■控制柜:由控制面板、電機泵、送油閥、回油閥、截止閥、電磁換向閥、電液伺服數字閥、管路、油箱等系統構成,主要實現對油缸(千斤頂)、活塞啟動、后退、停止、壓力大小、速度快慢的控制。
■微機控制電液測控系統見后。
Third, the structure:
The horizontal static load anchoring machine is composed of a main machine and a control cabinet (including an oil source, a pump station) and a microcomputer control system.
■ Host: It consists of load sensors, racks, hangers, lifting beams, coamings, jacks and pads, anchor plates, anchors, etc. Among them, the anchor plates, anchors and pads are replaced with different anchor plates and anchors according to different test root numbers.
■Control cabinet: It consists of control panel, motor pump, oil supply valve, oil return valve, globe valve, electromagnetic reversing valve, electro-hydraulic servo digital valve, pipeline, fuel tank, etc. It mainly realizes the cylinder (jack) and piston. Start, retreat, stop, pressure, speed control.
■ Microcomputer controlled electro-hydraulic measurement and control system is shown below.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
上海榮計達儀器科技有限公司