GE118-A型實時監控拷貝型高速整經機

GE118-A Micor-Computer Real Time Monitoring Copy And High-Speed Warping Machine

GE118-A型實時監控烤貝高速整經機為新開發的高性能整經設備。本機沒置了高品質的閉環張力控制系統（P1D）,保證紗片總張力的恒定和精確。本機的微電腦控制系統能在整經過程中連續監測益以直徑并安時進行張力控制，保正成組盤頭的直徑（外周長）及米長一致。

GE118-A Warp i ng mach i ne i s a new developed mach i ne with good funct i on. The warper has a closed ci rcuit tens i on (PID)to sure of the eternally fixed and accurate of the yarn. The micro-computer real-time monitoring system can detect beam's diameters in succession and regulate the tension at a I I t ime to make sure that d iameters of a set of beams are equal.

Main Techno Iongy Parameter

1. Warp Ii ne speed:100^_1000m/mi n

2. Warp beam size:21 "x 021" (inch ), 21" X O30ⁿ (inch).

3. Control way: computer real-time control led and monitor.

4. Tens i on roI I er: real-time PID adjusts yarn tension i n cIosed loop control.

5. Bean up and down, cI amp i ng and brake: pneumat i caI Iy operated.

6. Main motor: 7. 5KW AC-frequency control led with constant I inear speed and closed ci rcuit.

7. Brake torque:1600NM.

8. Ai r connect ion: 6 bar.

9. Copy precision: the outer per imeter are the same when the circles are the same, the meter mistake Iesser than 5m.

10. Maximum count ing range:99999 meters (circle).

10、計數范圍99999米（卷）

Main Features

1、根據母盤頭的樣本，拷貝成組參數相同的盤頭。

2、電腦實時檢測盤頭的直徑、米長和圈數，保證成組盤頭直徑（外周長）及米長一致。

3、張力羅拉實施PID閉環調節張力，保證紗線張力平穩。

4、計算精度高，具有報警功能。

5、聯機修正整經參數，母盤頭可以修正整經長度，子盤頭可以修整外周長和米長。

6、盤頭裝卸由氣動制動器，羅拉制動米用電動制動器。

7、主軸制定采用氣動制動器，羅拉制動采用電動制動器。

8、操作靈活方便，可以進行模擬盤頭配制。

1. According to mother beam, copy sets of same beams.

2. The micro-computer real-time monitor ing system can detect beam's diameters i n succession and regulate the tension at a I I time to make sure that diameters, out per imeter and Iength of a set of beams are equaI.

3. Tension rolI er adjusts yarn tens i on by PID, and then makes yarn tension stably.

4. The mach i ne can give an a I arm when it i s in errors and caIcuI at i on precision is high.

5. Revising warping parameter on Iine. Mother beam can revise warping Iength and sub-beam can revise outer per imeter and Iength.

6. The beam's load and unIoad is dr i ven pneumat icaI Iy, up and down straight line so it runs stead ily and or i entates accurately.

7. Main shaft brakes pneumatically. RolI er adopts electr ic break.

8. Operation i s easy and can s i mu I ate the beams group.